Folding away
1.
Remove mattress.
2.
Use the strap to pull the bottom of the bed to half height.
3.
For unlocking the side parts, first feel where the two pressure points
are under the joint in the middle of the short side components (with the
label „press to unlock") and press them in while slightly lifting the joint
rod. It is important for the joint rods to be unlocked on both sides of the
pressure point.
4.
The pressure points on the long side elements are then unlocked in the
same way.
5.
Fold the bed together by pulling upwards the strap in the center of the
bed base, bringing the four side elements close together.
6.
Now wrap the mattress round the folded bed and close the hook and
loop fasteners.
7.
Finally, put the bed into its travel bag.
GB
11