Mac allister MPWP2200 Mode D'emploi page 33

MPWP2200 by MacAllister
WARNING! Never connect live or neutral wires to the earth terminal
of the plug, which is marked with E.
Only fit an approved 13 Amp BS 1363 or BS 1363/A plug and the
correctly rated fuse. If in doubt, consult a qualified electrician.
If a moulded plug is fitted and has to be removed take great care
in disposing of the plug and severed cable, it must be destroyed to
prevent engaging into a socket.
Repair
This product does not contain any parts that can be repaired by the consumer.
Contact an authorised service centre or a similarly qualified person to have it
checked and repaired.
Storage
1. Switch the product off and disconnect it from the power supply.
2. Disconnect the product from the water supply.
3. Clean the product as described above.
4. Store the accessories at the back of the product
5. Drain remaining water and wash out the soap tank at the end of the working
session.
6. Store the product and its accessories in a dry, frost-free place. Step down the
brake pedal to lock the rear wheel.
7. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10 °C and 30 °C.
8. We recommend using the original package for storage or covering the product
with a suitable cloth or enclosure to protect it against dust.
Transportation
1. Switch the product off and disconnect it from the power supply.
2. Disconnect the product from the water supply.
3. Attach transportation guards, if applicable.
4. Unlock the brake and move the product using the front wheel (5), rear
wheel (13) and transportation handle (1).
5. Protect the product from any heavy impact or strong vibrations which may
occur during transportation in vehicles.
6. Secure the product to prevent it from slipping or falling over.
MNL_MPWP2200_MAC_GB_V5_200528.indd 33
Care and maintenance
5/28/20 8:39 AM
EN EN
33