Mac allister MPWP2200 Mode D'emploi page 20

Before you start
EN
Accessories
NOTE: Only use mild, environmentally friendly detergents. Never
use aggressive chemicals, abrasive detergents or similar to avoid
damage to your health, the product and the environment.
WARNING! Avoid skin contact with detergents, in particular contact
with eyes! If detergent gets in your eyes, flush your eyes with clean
water and seek immediate medical attention!
Connection to the water supply
WARNING! This product is not intended to be connected to the
potable water mains!
Observe the regulations of your local utility company when connecting
the product to a water supply line! It is prohibited to connect this
product to the drinking water facility without a backflow preventer
which corresponds to EN 12729 Type BA or EN 61770! Make sure
that the hose is at least a diameter of min. Ø 12.7 mm (1/2") and is
reinforced!
Connection to the water supply
1. Attach the water inlet hose adaptor (22) on the water inlet (6) (Fig. 14).
2. Attach a suitable water hose (not included) onto the water supply and then
the other end onto the water inlet hose adaptor (22).
3. Open the water supply.
20
MNL_MPWP2200_MAC_GB_V5_200528.indd 20
6 22
22a
Fig. 14
MPWP2200 by MacAllister
5/28/20 8:39 AM