Table Des Matières - Mac allister MPWP2200 Mode D'emploi

Before you start
EN
You will need
(items not supplied)
Suitable personal protective equipment
Crosshead screwdriver
Water hose
Assembly
WARNING! The product must be fully assembled before operation!
Do not use a product that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the product!
Do not connect the product to power supply before it is completely
assembled!
NOTE: Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.
Spray gun holder
1. Slide the spray gun holder (8) to the product and secure it with the screw (8a)
(Fig. 1).
Pressure hose
1. Insert the connector (3a) of the pressure hose (3) into the hose connection
port (9a) of the spray gun (9). Ensure it snaps in place (Fig. 2). Press the
release button (9b) to unlock if necessary.
14
MNL_MPWP2200_MAC_GB_V5_200528.indd 14
8
8a
Fig. 1
MPWP2200 by MacAllister
(items supplied)
Extension lance (7)
Spray gun holder (8)
Fixing screw (8a)
Spray gun (9)
Rotary nozzle (18)
Vario nozzle (19)
Rims brush (20)
Short extension lance (21)
Water inlet hose adaptor (22)
Patio brush (23)
9
Click
3a
3
Fig. 2
9b
9a
5/28/20 8:39 AM