INVENTOR M3GHP290-12 Manuel D'utilisateur page 12

|Installation
Part Description
Unit Adaptor
Exhaust Hose
Window Slider Adaptor
*
Wall Exhaust Adaptor A
*
(only for wall installation)
Wall Exhaust Adaptor B
(with cap) (only for wall
*
installation)
Screw and anchor
*
(only for wall installation)
* Window Slider A
* Window Slider B
Power Cord Buckle
NOTE: Items with * are optional. Slight variations in design may occur.
Window Installation Kit
Step One: Preparation of the Exhaust Pipe
Apply pressure to the exhaust pipe and the window
adaptor one side, and the unit adaptor on the other, attach
with the use of the elastic buckles located on the adaptors.
Step Two: Install the Exhaust hose assembly to the unit
Insert unit adaptor of the Exhaust hose assembly into
the lower groove of the air outlet of the unit while the
hook of the adaptor is aligned with the hole seat of the
air outlet and slide down the Exhaust hose assembly
along the arrow direction for installation.
Step Three: Preparing the Adjustable Window Slider
1. Depending on the window size, make necessary
adjustments on the window slider.
2. If the length of the window requires two window
sliders, use the bolt to fasten the window sliders once
they are adjusted to the proper length.
3. For some models, if the length of the window
requires three window sliders(optional), use two bolts
to fasten the window sliders once they are adjusted to
proper length.
Window slider A Window slider B Window slider C
MODEL A
12
Quantity
1 pc
1 pc
1 pc
1 pc
1 pc
4 set
1 pc
1 pc
1 pc
Bolts
Europe
Part Description
* Bolt
Security Bracket and Screw
*
Drain Hose
Drain Hose Adaptor(only for
heat pump mode)
* Foam Seal A (Non- adhesive)
* Foam Seal B (Adhesive)
* Foam Seal C (Adhesive)
Remote Controller
and Battery
Press into
Unit adaptor
Make sure the hook of the adaptor is aligned
with the hole seat of the air outlet.
Hook
adaptor
or
or
MODEL B
Exhaust hose
Exhaust hose
assembly
Press into
Window slider
adaptor
Hole Seat
Make sure the adaptor is
Lower groove
inserted into the lower
groove of the air outlet.
Window slider A
MODEL A
Window slider A
MODEL B
Bolts
Window slider A Window slider B Window slider C
Quantity
1 pc
1 set
1 pc
1 pc
2 pc
2 pc
1 pc
1set
or
Bolt
Window slider B
Bolt
Window slider B
EN