Maintenance - INVENTOR M3GHP290-12 Manuel D'utilisateur

|Operation
WAIT 3 MINUTES BEFORE RESUMING OPERATION
Once the unit has stopped its operation, it can not be re-
started within the first 3 minutes, for the protection of the
device. Operation will automatically restart after 3 minutes.
I SENSE feature
The I SENSE function enables the remote control to
measure the temperature at its current location and
send this signal to the air conditioner every 3 minutes
interval. Measuring the ambient temperature from
the remote control (instead of using the indoor unit it-
self) will enable the portable air conditioner to opti-
mize the temperature around you and ensure maxi-
mum comfort.
NOTE: For optimal results keep the remote pointing to
towards the unit and avoid any obstacles between the
unit and the remote that could possibly block the signal.
Water drainage
- When under dehumidifying mode, remove the drain
plug for the back of the unit and install the drain con-
nector (5/8 universal female mender) with a 3/4 hose
(may be purchased locally). For models without the
drain connector, please attach the drain hose to the
outlet, while placing the other side of the hose directly
Remove the
over the drainage port of your basement floor.
upper drain plug
Continuous
Remove the
drain hose
upper drain plug
Remove the
Remove the
upper drain plug
upper drain plug
√
Continuous
MODEL A SCALE 0.500
drain hose
Continuous
Continuous
drain hose
drain hose
√
MODEL A SCALE 0.500
√
√
During heating pump mode, remove the lower drain
MODEL A SCALE 0.500
MODEL A
plug from the back of the unit, install the drain connec-
tor(5/8" universal female mender) with 3/4" hose(local-
ly purchased). For the models without drain connector,
just attach the drain hose to the hole. Place the open
end of the Hose adaptor directly over the drain area in
your basement floor.
NOTE: Βe certain the hose is secure without any
leaking. Direct the hose toward the drain, in such a
manner that there are no breaks or bents securing
smooth water flow. (See Figs with R. Do never let it up.
(See Figs with S ). When the continuous drain hose is
not of use, ensure the drain plug is installed firmly to
prevent possible leakage.
Remove the
lower drain plug
Remove the
Continuous
lower drain plug
Remove the
drain hose
Remove the
lower drain plug
Continuous
lower drain plug
drain hose
drain hose
adaptor Continuous
Continuous
SCALE 0.500
√
drain hose
drain hose
MODEL A
drain hose
adaptor
SCALE 0.500
√
drain hose
MODEL A
drain hose
adaptor
adaptor
SCALE 0.500
√
√
MODEL A
EN
MODEL A
Remove the
upper drain plug
Continuous
Remove the
drain hose
upper drain plug
Remove the
Remove the
upper drain plug
upper drain plug
√
Continuous
MODEL B
drain hose
Continuous
Continuous
drain hose
drain hose
√
MODEL B
√
√
MODEL B
SCALE 0.500
Remove the
lower drain plug
Remove the
Continuous
lower drain plug
Remove the
drain hose
Remove the
lower drain plug
Continuous
lower drain plug
drain hose
drain hose
Continuous adaptor
Continuous
√
drain hose
drain hose MODEL B
drain hose
adaptor
√
drain hose
MODEL B
drain hose
adaptor
adaptor
√
SCALE 0.500
√
MODEL B
√
drain hose
adaptor
√
drain hose
√
adaptor
- When the water level of the bottom tray reaches a
drain hose
drain hose
adaptor
predetermined level, the unit beeps 8 times; the digi-
adaptor
tal display area shows "PI". At this time
the air conditioning/dehumidification
process will immediately stop. Howev-
er, the fan motor will continue to op-
erate (this is normal). Carefully move
the unit to a drain location, remove the
bottom drain plug and let the water
drain . Re- install the bottom drain plug and restart the
machine until the "PI" symbol disappears. If the error
persists, please call for service.
NOTE: Be sure to reinstall the bottom drain plug firm-
ly to prevent leakage before using the unit.

| Maintenance

WARNING:
- Be sure to unplug the unit before cleaning or
servicing
- DO NOT use flammable liquids or chemicals to
clean the unit.
- Do not wash the unit directly under a tap or us-
ing a hose as it may cause electrical shock.
- DO NOT operate this unit if the power cable is
damaged in any way. If the power cord is dam-
MODEL B
aged it must be replaced from the product man-
Upper filter
ufacturer and never repaired.
(take out)
Clean the Air Filter
Upper filter
(take out)
Upper filter
Upper filter
(take out)
(take out)
Remove the
screw,then
take the lower
Remove the
filter out.
screw,then
Remove the
Remove the
take the lower
screw,then
filter out. screw,then
take the lower
take the lower
filter out.
filter out.
MODEL A
MODEL A
CAUTION
DO NOT operate the unit without filter because
dirt and lint will clog it and reduce performance.
MODEL B
drain hose
adaptor
drain hose
X
Press the power
adaptor
drain hose
cord buckle into X
drain hose
the rear cover.
adaptor
adaptor
√
SCALE 0.500
Press the power
cord buckle into
Press the power
the rear cover.
Press the power
cord buckle into
SCALE 0.500 cord buckle into
the rear cover.
the rear cover.
SCALE 0.500
SCALE 0.500
Uper air filter
(take out)
Uper air filter
(take out)
Uper air filter
Uper air filter
(take out)
(take out)
Lower air filter
(take out)
Lower air filter
(take out)
Lower air filter
Lower air filter
(take out)
(take out)
SCALE 0.500
MODEL A
SCALE 0.500
Remove the air filter
SCALE 0.500
SCALE 0.500
MODEL A
Remove the air filter
Remove the air filter
Remove the air filter
X
X
SCALE 0.500
SCALE 0.500
SCALE 0.500
SCALE 0.500
SCALE 0.500
SCALE 0.500
SCALE 0.500
SCALE 0.500
MODEL B
MODEL B
MODEL B
MODEL B
17