Ascaso Kap ONE Manuel De L'utilisateur page 23

NOTE:
On TRONIC models, once the
steam has stopped, the machine
must return to correct coffee-
making temperature. As a warning,
the espresso and lungo
2
buttons blink during the process,
while the hot water and steam
buttons are lit.
After approximately 60 seconds, all
of the buttons are lit once again.
We recommend waiting 5 minutes
before making coffee.
IMPORTANT:
After each use it is advisable to
release steam for 5 seconds to
clean the tube and avoid blockage.
To clean absorption holes (A and
B), you can use a toothpick or
paper clip. Make sure the nozzle is
free of obstructions. Hole B should
always be in the upper area.
IMPORTANT:
Never touch the
hot water/steam
nozzle during or
after use. There
is a risk of burn
injuries. Use a
the plastic clip
attached to the
nozzle.
5
DISPENSING HOT WATER
(TRONIC AND TRONIC DUO
MODELS)
1. Put a cup below the hot water/
3
steam nozzle
2. Press the hot water button
The machine begins dispensing
hot water. During this process,
the hot water button
lit, while the rest of the buttons
are unlit.
3. To stop dispensing, press the hot
water button again
water automatically stops after
30 seconds.
IMPORTANT:
Never touch the hot water/steam
nozzle during or after use. There
is a risk of burn injuries. Use a the
plastic clip attached to the nozzle.
.
6
.
4
remains
4
. The hot
4
23