Ascaso Kap ONE Manuel De L'utilisateur page 21

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

holder), it should be emptied and
reinserted in the machine. To do so,
remove the tray
8
used-capsule holder from inside
TRONIC ONE, TRONIC and
TRONIC DUO models have
a system that alerts when the
used-capsule holder is full. When
the number of used capsules
reaches the maximum allowed,
the espresso button
while the lungo button
The rest of the buttons remain unlit.
When this happens, empty the
used-capsule holder
back in the machine along with the
tray
, and simultaneously press
8
espresso
and lungo
2
for 5 seconds. The machine is once
again ready to work and all buttons
are lit up.
and take out the
.
9
remains lit
2
blinks.
3
, put it
9
buttons
3
RESERVOIR WATER LEVEL
The water reservoir
12
system by which to
control the water
level. Make sure
that the water is
always between
the MIN and MAX
level indicated on
the reservoir
The TRONIC ONE, TRONIC and
TRONIC DUO have an electronic
system that alerts when there is no
water.
If the reservoir is left empty during
dispensing, all of the buttons (2
or 4, depending on the version)
blink, and the machine is blocked
once the dispensing in progress is
completed.
When this happens, fill the
reservoir according to the previous
instructions. On detecting that there
is once again sufficient water, the
buttons are relit and the machine is
once again ready to work.
NOTE:
TRONIC ONE, TRONIC and
TRONIC DUO models have a level
sensor inside the reservoir, inside a
plastic box attached to the wall of
the reservoir.
has a visual
.
12
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kap tronic oneKap tronicKap tronic duo

Table des Matières