Making Coffee - Ascaso Kap ONE Manuel De L'utilisateur

3

MAKING COFFEE

This machine has been designed
to be used with FAP coffee
capsules. Consult with your
distributor about using any other
type of capsule. They could
damage the machine.
1. Connect the machine, placing
the general ON/OFF switch (1)
in position "I". On ONE models,
the ON/OFF
up.
2. Wait until the machine reaches
the correct temperature and
is ready to make coffee. For
ONE models, the wait is
approximately 1 minute. For
TRONIC ONE, TRONIC and
TRONIC DUO models, wait
until the illuminated espresso
and lungo
2
blinking and are constantly lit.
During this time no operation
of any kind may be carried out.
For TRONIC and TRONIC
DUO models, the water
and steam
lit throughout the warm-up
process.
3. Open the draw to insert the
capsules
11
in the slot, ensuring that it is
inserted correctly (the narrower
part goes in first) and close the
drawer so that it shuts tightly.
pilot light lights
7
buttons stop
3
4
buttons are
5
, place the capsule
NOTE:
If the drawer to insert the capsules
is not shut correctly, completely
11
and tightly closed, the machine
will not work. Make sure that it is
correctly aligned when closing.
4. Place the cup on the tray
over the centre hole of the cup
rest .
15
5. Press the espresso
lungo button (according to
3
version) to begin dispensing
the coffee. On ONE models,
press the espresso button
again to stop dispensing.On
TRONIC ONE, TRONIC and
TRONIC DUO models, the
button pressed remains lit while
the others go out. Dispensing
stops automatically once the
programmed amount of coffee
has been made, and all of the
buttons light up again.
,
8
or
2
19