Minelab GPZ 7000 Guide De Démarrage page 13

Masquer les pouces Voir aussi pour GPZ 7000:

Les langues disponibles

Quick Start

Start detecting quickly with these six easy steps.

When the detector is turned on for the first time, or following a Reset All, you will be prompted to set the

language, the weight and length units, and the time zone before the Detect page will be displayed.

1 Turn On

Press the Power button on the

control panel.

Do not press any buttons until the battery

indicator is visible in the status bar.

2 Select Quick Start

The first function on the

Detect page is Quick Start.

It is highlighted by default.

Press Select to start the

Quick Start guide sequence.

3 Reset Settings

Select 'Reset Audio and Detection Settings'

when prompted to select an option.

Take the Field Guide included with your GPZ 7000 when you go detecting for reference.

Read the instruction manual on CD for more information on advanced operation of the detector.

Quick Start

4 Noise Cancel

Carry out Noise Cancel noise reduction by

following the guide sequence.

5 Quick‑Trak

Carry out Quick-Trak ground balancing by

following the instructions displayed on-

screen. It is very important to keep the coil

as close as possible to the ground, and to

sweep repeatedly over the same spot. The

audio will quickly become quieter.

6 Start Detecting

reset the detector and return to detecting.

If you experience any

difficulties using the

detector after changing

any settings, run the

Quick Start guide

sequence again to easily