Angelcare AC401-A Manuel Du Propriétaire page 19

OUT-OF-RANGE ALARM
• Alarm activates when your two units are not communicating.
• The Parent Unit will emit a double beep every 8 seconds.
• Out of Range Icon will flash on the screen.
IMPORTANT
If the Out-of-Range function is activated and you turn the Nursery Unit OFF the
Out-of-Range Alarm will sound and/or vibrate (depending on the alarm mode chosen).
Turn the Nursery Unit ON again to reactivate the link.
TO STOP THE OUT-OF-RANGE ALARM:
5.5 - SOUND TRANSMISSION (VOX)
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IMPORTANT
To avoid feedback (whistling),
keep both units at least 10 feet
apart (3 meters).
Allows you to select your option on how you monitor sound:
VOX (voice activation picks up sound based on the setting of the sensitivity level) or
Continuous (Monitors continuously so will pick up all sounds).
TO ACTIVATE VOX MODE:
1
2
Press 2 seconds
to turn the Parent
Unit OFF.
VOX ON
(VOX)
VOX OFF
(Continuous)
The Out-of-Range will flash
when changing the channel
or if the unit is reconnecting.
Turn the Nursery
OR
Unit ON.
IF YOU HEAR NO SOUND:
• Check that both units are switched on.
• Check that both units are plugged into
functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them as necessary
per unit).
• Bring the Parent Unit closer to the
Nursery Unit.
1) Press MENU button 3 times.
The VOX icon will appear.
2) Using the arrows, to turn the function
ON or OFF.
NOTE:
By deactivating VOX the Continuous
setting is ON.
3) Press SELECT button to confirm
your choice.
E
N
19