Applications; Identification - Modine ECO AGD2 Mode D'emploi

2. Applications

2.1 The unit must not be put into service until the machine to which it will be incorporated has been declared in conformity
with the Machinery Directive 2006/42/CE, see "Declaration of Incorporation" page 155. The unit is defined as "Partly
completed machinery".
2.2 The product must only be used for the stated purpose: use other than that prescribed is to be considered improper and
exempts Modine from all liability.
2.3 Use in unspecified operating conditions must be considered incorrect or improper.
2.4 Make sure that the fluids used are compatible with the materials used to build up the model.
2.5 The minimum protection level of the model is IP44. Refer to the annexe "ADDITIONAL INFORMATION SHEET" (when
present).
2.6 All the models are supplied with heat exchangers manufactured to internal standards in accordance with DIN8964 for
internal cleaning.
2.7 Please refer to any attachments to this manual.
2.8 Product description (see identification code, Chapter 15.2):
2.8.1 AGD Aeroevaporators (Unit Coolers) with A2L refrigerant series AGD have the task of optimising the heat exchange
between air and another fluid, classified as A2L according to ISO817:2014 and ASHRAE 34, in a refrigeration
system. Inside a casing there is a heat exchanger consisting of 2 finned packs interconnected to a tube coil
each. The flow of relatively warm ambient air, created by the axial fans, passes through the exchangers where
the evaporation of the liquid flowing through the tubes takes place, resulting in the absorption of the heat and the
lowering of the outlet air temperature.

3. Identification

3 1 For any communication, request for assistance or spare parts, please provide the model name and serial number shown
on the data plate:
MANUFACTURER:
MODINE CIS ITALY S.R.L.
VIA GIULIO LOCATELLI, 22
33050 POCENIA (UDINE) ITALY
MADE IN ITALY/EU
MODEL AGD312E7ED
SERIAL NR. AA123456789
NET WEIGHT [KG] 32
CUSTOMER CODE
PS [BAR] 30
TS MAX/MIN [°C] 125/-40
CAT (PED) Art. 4 par. 3
NR. OF MOTORS 02
MOTORS POW. SUPPLY 230V/1/50-60HZ
TOT. 200-270 W 0.88-1.24 A
HEATERS POWER SUPPLY 400V/3/50-60HZ
HEATERS TOT 2900W
AGD2
DATE 01/01/2021
CAPACITY [L] 3.3
AGD3
FLUID GROUP 1. G
VOL [L]
DN 20
RPM 1300-1350
Figure 1
31
www.modine.com