bort medical 215 930 Mode D'emploi page 8

1 2
8
Select the stabilisation element and slide it
fully into the velour pocket intended for this
purpose.
Static and dynamic application possibilities,
confi guration-dependent: 1. Spiral spring
(fl exible), 2. Splint (rigid)
In the next step, pull the support over the
large toe (hallux). Here, the relief pad should
be precisely on the same level as the metat-
arsophalangeal joint.
Close the BORT Generation Hallux Valgus
Splint over the instep of the foot with an
even pull. Pay attention to pleasant wearing
comfort.
Pull the laterally positioned
corrective support towards
the heel with a well-dosed
pull, here a visible correction
of the hallux valgus (large toe
position discrepancy) should
take place.