Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
engLIsh
Congratulations on the purchase of your Bushnell Night Vision Product. Bushnell Night Vision products
are comprised of high quality image intensifier tubes and optics. Bushnell Night Vision products amplify
existing light, allowing you to see in dark conditions too dark for the naked eye.
2
5
6
4
13
2
7
3
10
9
14
11
8
1
hoW nIghT VIsIon Works
Bushnell Night Vision products collect and amplify existing light through the objective lens, which is
then focused on the image intensifier. Inside the intensifier, a photocathode is "excited" by the light and
converts the photon energy into electrons. These electrons accelerate across an electrostatic field inside
the intensifier and strike a phosphor screen (like a green monochrome TV screen) which emits an image
that you can see. It is the acceleration of electrons, which provides gain and enhances the image. This is a
Generation I device.
Installing Batteries
• Unscrew the Battery Compartment. (1).
• Insert two "N" batteries into the compartment positive end first.
• Reseal the Battery Compartment Cover.
attaching The Monocular To The headset
• Remove the plugs from the monocular housing (near the battery compartment) (2)
• Attach and tighten the bracket to the monocular using two screws (3).
• Slide the dovetailed bracket of the headgear into the slot of the bracket (4).
12
detaching The Monocular From The headset
• Loosen the knob located on the headset bracket (5).
• Push down on the release button on top of the knob - the Monocular cannot become detached unless
you push this button (6).
• Pull the headset away from the Monocular.
3
Publicité
Table des Matières
