Storage And Transport; 11: Electrical Connection; Disposal And Recycling - Scheppach bgs 700 Traduction Du Manuel D'origine

SK DK ES FIN IT NL PL PT SE SI NO
DE GB FR CZ
10. Storage/Transport
Store the equipment and accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage temperature
is between 5 and 30 °C. Store the electric tool in its
original packaging.
m Attention! Unplug the machine!
The appliance must unconditionally be secured
against falling or turning down during transport.
The appliance can be lifted on the left and right grin-
ding wheel / belt sander cover. Power cable, flexible
lamp shaft etc. should not be used for transport
purpose.
11. Electrical connection
The installed electric motor is factory connected
ready for operation.
The connection meets the applicable VDE and DlN
regulations.
The connection made by the customer as well as
any extension cables used must comply with all
relevant regulations.
Connection and repair work on the elctric equipment
must be carried out by a qualified technician only.
Important note
The motor rating is S 1. This means that when over-
loaded it switches off automatically. After a cooling
period (can vary) you may switch it on again.

Disposal and recycling

12.
The equipment is supplied in packaging to prevent
it from being damaged in transit. The raw materials
in this packaging can be reused or recycled. The
equipment and its accessories are made of various
types of material, such as metal and plastic. Never
place defective equipment in your household refuse.
The equipment should be taken to a suitable collec-
tion center for proper disposal. If you do not know
the whereabouts of such a collection point, you
should ask in your local council offices.
22 / 136
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58