Makita DUR184L Manuel D'instructions page 10

Installing the guard
WARNING:
Never use the tool without the
guard illustrated in place. Failure to do so can
cause serious personal injury.
CAUTION:
Take care not to injure yourself on
the cutter for cutting the nylon cord.
1. Align the projections on the protector with the
grooves of the motor housing.
1
► 1. Protector 2. Projection 3. Groove
2.
Align the projections on the protector holder with
its counter parts of the motor housing.
► 1. Protector holder 2. Projection
3.
tor and the protector holder.
► 1. Hex bolt
Installing the wire guard
CAUTION:
wait for the cutting head comes to standstill. Do
not adjust the wire guard with your foot.
3
2
To reduce the risk damaging the objects in front of the
cutting head, insert the wire guard so that it controls the
cutting range of the mowing line.
Slightly expand the wire guard outward and then insert
it into the holes of the protector.
10 ENGLISH
1
Tighten the hex bolts securely to fasten the protec-
Before adjusting the wire guard,
2
1