Use Of The Hand Steam Cleaner - Cleanmaxx SM102B Mode D'emploi

18. Store the appliance upright in a cool, dry place. To stop the appliance, return it to a vertical
(standing) position. Engage the pivot on the cleaning head and the appliance is locked in place.
19. Before using the appliance again, the water tank should always be checked for any residual
water and, if necessary, completely emptied.

Use of the hand steam cleaner

The following attachments belong with the hand steam cleaner:
Nozzle attachment
Use the nozzle attachment to clean places that are not readily accessible or
crevices, for instance.
Spatula attachment
Use the spatula attachment to remove stubborn stains, such as limescale
and deposits.
Circular brush attachment
Use the circular brush attachment to remove stains, for instance on tiles,
wheel rims, mirrors and non-cold glass surfaces.
Long brush attachment
Use the long brush attachment to remove dirt, in grooves and crevices, for instance.
02626_DE-GB-FR-NL_V0.indb 24 02626_DE-GB-FR-NL_V0.indb 24
1. If the base unit is located in the stand on the fl oor cleaner,
push the unlatching button (1) upwards in order to release the
locking mechanism. Remove the base unit (2) from the stand.
2. Insert the adapter (25) onto the appliance's steam outlet
nozzle. You must hear it click into place.
3. Select an attachment (see above) and insert it onto the adapt-
er until it stops. When attached, the fl exed end piece of the
appliance (with the exception of the spatula attachment) must
point to the left when the base unit is held with the water
tank facing you.
4. Turn the attachment 90 degrees.
• To remove an attachment from the adapter, turn it back 90 de-
grees and then pull it off.
24
26.10.12 07:30 26.10.12 07:30