Use Of The Hand Steam Cleaner - Cleanmaxx SM102K Mode D'emploi

use of the hand steam cleaner

The following attachments belong with the hand steam cleaner:
• If you want to remove the adapter from the base unit, press on the adapter's unlatching
lever (26) and remove it from the base unit.
01168_DE-GB-FR-NL_V0.indd 22
Nozzle attachment
Use the nozzle attachment to clean places that are not readily accessible or
crevices, for instance.
Spatula attachment
Use the spatula attachment to remove stubborn stains, such as limescale
and deposits.
Circular brush attachment
Use the circular brush attachment to remove stains, for instance on tiles,
wheel rims, mirrors and non-cold glass surfaces.
Long brush attachment
Use the long brush attachment to remove dirt, in grooves and crevices, for
instance.
1. If the base unit is located in the stand on the floor cleaner,
push the unlatching button (1) upwards in order to release
the locking mechanism. Remove the base unit (2) from the
stand.
2. Insert the adapter (25) onto the appliance's steam outlet
nozzle. You must hear it click into place.
3. Select an attachment (see above) and insert it onto the
adapter until it stops. When attached, the flexed end piece of
the appliance (with the exception of the spatula attachment)
must point to the left when the base unit is held with the
water tank facing you.
4. Turn the attachment 90 degrees.
• To remove an attachment from the adapter, turn it back 90
degrees and then pull it off.
22
26.05.11 12:02