Operation And Handing; Operation - CASO DESIGN Crema Grande Jet 1658 Mode D'emploi

21 Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
WARNING
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.

21.1 Operation

milk up to that maximum marking.
PLEASE NOTE
► Please note the maximum markings. Please use for milk froth only the bottom MAX-
marking. Otherwise so much foam will be made that the lid would lift and milk would
overflow.
You can make warm as well as cold milk froth
PLEASE NOTE
► Please touch the power button with your finger in such a manner that you can still see
the different settings.
Warm milk froth
Please put the whisk for frothing into holder. Switch on the power button.
The power button lights red. This is the setting for the warm milk froth. The appliance
starts to make milk foam and stops automatically as soon as the foam is finished.
Heating milk
Please put the whisk for frothing into holder.
Press the power button twice, it blinks red, the milk is heated.
The whisk rotates with reduced speed in order to ensure even heat distribution and
prevent the milk from burning.
Cold milk froth
Please put the whisk for frothing into holder.
Switch on the appliance. Press the power button for approximately 2 seconds until it lights
blue. Now cold milk froth is made.
Caso Crema Grande Jet
With the Crema Grande Jet you can heat cold as well as warm milk
froth. The appliance has got three markings for the filling:
MIN: Fill milk at least up to that marking
MAX (bottom): Fill milk up to that maximum marking to make milk
froth.
MAX (top): When you want to heat milk but not froth it, you can fill
29