Operation And Handing; Switch-On; Cooking - CASO DESIGN 1491 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
14

Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.

14.1 Switch-On

Please use the temperature adjust scale different concerning the meal you are preparing.
The temperature sensor is designed to maintain the temperature.
Scale setting at the controller

14.2 Cooking

Please wait 5 – 10 minutes after you have switched on the device. If the control light has
turned out you can start with the cooking.
If the food is cooked completely you can maintain the temperature of the food by turning
the temperature controller back to the position „MIN".
Warning
First of all put the temperature adjust scale to the
position „OFF" and then assert the automatic
temperature controller in the holder "A"
If the temperature controller isn't fixed properly, a very
high temperature can arise which can cause injuries or
damages to the appliance. Please ensure that the
temperature controller is plugged in correctly.
Then put the plug in a 230 volt safety-contact power
outlet.
MIN = least temperature level = keep warm function
1-2 = temperature range up to 100°C approx.
3-4 = temperature range up to 200°C approx.
5
= max. temperature range up to 240°C approx.
OFF = heating is off
Caution: In position "Off" the pan can still be extremely hot over a
longer period
Heating levels
1 & 2
3 & 4
5
MIN
Food type
scrambled eggs , etc.
pancake , etc.
Fry steak , fish , etc.
Keep warm function
34

Publicité

Table des Matières
loading

Table des Matières