Fitting And Removing The Grass Box; Fitting And Removing The Mulch Plug - Stihl RMA 510 Mode D'emploi

English
7
8
1
► Align upper handlebar (1) and lower handlebar (2) so
stud (4) engages in bore (3) on both sides.
► Insert bolt (5) and align so the bolt head is flush with lower
handlebar (2) on both sides.
► Screw on star grip nut (6).
► Press cable (7) into holder (8).
The handlebar must not be dismantled again.
7.2

Fitting and Removing the Grass Box

7.2.1 Fitting the Grass Box
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
► If the side chute is still in place: Remove the chute.
► If the mulch plug is still in place: Remove the mulch plug.
1
14
2
2
5
4
6
3
1
5
4
3
2
► Open the discharge shield (1) and hold it in position.
► Hold grass box (2) by the handle (3) and engage the
hooks (4) on the rod (5).
► Rest the discharge shield (1) on the grass box (2).
7.2.2 Detaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the handle.
► Close the discharge flap.
7.3

Fitting and Removing the Mulch Plug

7.3.1 Fitting the Mulch Plug
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
1
► Open the discharge shield (1) and hold it in position.
► Hold the mulch plug (2) by the grip (3) and fit it in the
discharge duct (4).
► Close the discharge shield (1).
7.3.2 Removing the Mulch Plug
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
7 Assembling the Lawn Mower
2 3
4
0458-723-9921-B