Kreg Crown-Pro NK7825 Guide D'utilisation page 7

H
Set your Crown-Pro
2
angle using the adjustment nut on the back.
A. Loosen the Plastic Thumb Nut (H) on the bottom
of the Crown-Pro
on the Spring Scale (K). Set the scale to match
your spring angle and re-tighten the nut.
B. Although there are only 3 common spring
angles found on most home center moldings,
your Crown-Pro
spring angle between 30° and 65°.
K
to match the spring
™
slightly so the angle can be set
™
can be set to match any
™
Step-by-Step
www.kregtool.com
38°