Kreg Crown-Pro NK7825 Guide D'utilisation page 10

Step-by-Step
Prepare to make your cut
5
Use the diagrams below to set your Crown-Pro
on your type of cut (Step 3) and set your saw angle
based on your wall angle (Step 4)
Right Inside Corner:
• Position your Crown-Pro™
to the left of the blade.
• Rotate your saw towards
the Crown-Pro™.
Right Outside Corner:
• Position your Crown-Pro
to the left of the blade.
• Rotate your saw away
from the Crown-Pro
Left Inside Corner:
• Position your Crown-Pro
to the right of the blade.
• Rotate your saw towards
the Crown-Pro™.
Left Outside Corner:
• Position your Crown-Pro
to the right of the blade.
• Rotate your saw away
from the Crown-Pro
*Diagrams indicate rough positioning only. During actual use,
Crown-Pro will rest directly on the saw bed, close to the blade.
™
800-447-8638
™
.
™
™
™
.
™
based
TM