Ingeteam INGEREV CITY Ground Manuel D'installation Et Usage page 25

Installing and connecting the unit
2. Connect the power cable and then switch ON (top position) the residual current device and
magnetothermic residual current device.
Single phase charging station. In three phase stations the connection terminals are R (phase R), S (phase S), T (phase T), N (neutral)
Optionally the station can be fitted with a residual current device block with automatic reset. In this case
the residual current device must be activated (switch the switch ON; top position) and then slide the tab
to the left as shown in the following figure.
ABA2020IQM01_B - Installation and Operation Manual
L N
T
O N
O N
O F F
O F F
and PE (ground).
Ingeteam
EN
ES
FR
IT
25