Ingeteam INGEREV CITY Ground Manuel D'installation Et Usage page 23

Installing and connecting the unit
2. Install the charging station on the trim. Fasten the joint using nuts and washers.
Pedestal
1. Install the pedestal in the ground using four threaded components. Fasten the joint using nuts and
washers. If you wish to add the bottom trim it should be installed between the ground and the pedestal.
2. Install the charging station on the pedestal. Fasten the joint using nuts and washers.
ABA2020IQM01_B - Installation and Operation Manual
Ingeteam
EN
ES
FR
IT
23