Communication Accessories; Local Communication; Ingerev City Ground - Ingeteam INGEREV CITY Ground Manuel D'installation Et Usage

Ingeteam

8. Communication accessories

These charging stations have a local RS-485 data bus that enables interconnection between the stations.
Configuration and monitoring of all stations is carried out using the software provided by Ingeteam.
All the charging stations can be accessed either locally or remotely. For remote connection they use an external
modem located in the installation or a modem supplied in the charging station if requested upon placing the order.
This section explains the wiring process for local connection, whereby this type of connection is available as
standard.
In order to install and operate the communication accessories that enable remote communication,
see the Communication Accessory Manual for INGEREV charging stations.

8.1. Local communication

8.1.1. INGEREV CITY Ground

Follow the instructions below to complete the local connection:
1. With the back enclosure still open, access the connection area opening the plate, as shown in the
following figure.
2. Connect the communication ring. The jumper of the control cards must be removed in all the
intermediate stations of the communication ring and installed in the ends of this ring.
First station
34
Intermediate station
ABA2020IQM01_B - Installation and Operation Manual
Communication accessories
Final station