Publicité
Les langues disponibles
Les langues disponibles
Sun Blast Operating Instructions and Parts Manual
Models CR015 and CR030
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
• Adjustable Input Ratings
• Match
Assembly
CR030 MODEL ONLY
Tools Required:
Phillips head screwdriver
Estimated Assembly Time:
5 minutes
Contents:
Tip Over Switch
Manifold
Tank Collar Bracket
Figure 1 - CR030 Model
Tank Top Heater (1)
Tank Collar Bracket (1)
M4x12 Machine Screws (2)
The tank collar bracket must be
assembled before the heaters can
be attached to the propane tank.
1. Align bolt holes in tank collar bracket
with bolt holes in center plate on
manifold.
2. Drive-in two machine screws
Machine Screw
Mounting Bolt Knob
3
(supplied) into the bolt holes
attaching tank collar bracket to
center plate on manifold. (Fig. 1)
Never use an open
WARNING
flame to check
for leaks.
Handwheel
Heat Regulator Knob
E
N
G
L
I
S
H
Publicité
