Rating Plate; Operation And Handing; Before Initial Use; Stepless Speed Regulation And Pulse Function - CASO DESIGN B 2000 Mode D'emploi

Assemble the device as follows:
Place the lid (2) on the jar. Place the measuring cup (1) into
the lid (2) and fix it be turning anti clockwise.
► The device will operate only when the jar with gear is placed correctly.
► Use the device only with placed lid.

14.2 Rating plate

The rating plate with the connection and performance data can be founded beneath the
device.

15 Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.

15.1 Before initial use

1. Clean the device thoroughly (refer to "cleaning and maintenance").
1. Clean all the parts which will come in contact with food.
Place the insulation pad (11) on the motor unit (10). The
holes in the insulation pad must be place precisely on the
intake of the gear and the safety switch.
Hold the lid at the handle and check
that the sealing is well fixed into the
lid.
Place the jar on the motor unit (10).
The gear in the jar (8b) must be place
on the intake of gear (8a) in the motor
unit.
Please note
Warning
15.2 Stepless Speed Regulation and Pulse
Function
Turn the knob to the right side to set the speed of the device
stepless from minimum to maximum.
Turn and hold the knob on the left side, when you want to use the
pulse function.
15.3

Blending

31