Warning Symbols; Machine Symbols - Garland 100 E Manuel D'instructions

3. WARNING SYMBOLS

The warning symbols that appear on the machine and
the manual indicate required information for a secure
use of the machine.
Danger and attention.
Read the instruction manual and follow
the warning and security instructions.
Maintain feet, hands and clothes well
clear of the blades.
Do not insert hands or any other body
part in the feeding hopper or in the
ejection mouth piece.
Maintain other people well clear of the
working area.
Danger of material being projected.
Maintain yourself well clear of the
machine if not adequately dressed.
If the cable is damaged during use,
disconnect from the mains straight away.
Use long working gloves.
Use security goggles and ear protectors.
Do not expose the machine to rain.
Before touching any parts of the machine,
wait for the machine to stop fully.
Before manipulating the machine,
disconnect from the mains.
Guaranteed noise level in dB(A).
Risk of electric shock.

4. MACHINE SYMBOLS

In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
Switch on. The engine will start and the
I
blades move.
Switch off. The engine and the blades
O
will stop.
25/112
Use cable extensions with a
minimum section of 2.5 mm
and no longer than 25 metres
and always fully untangled.
English
2