Warning Labels; Safety Rules - Garland 790 G Manuel D'instructions

21 | English

WARNING LABELS

The exhaust gas is poisonous. A good ventilation of
the work area must be guaranteed
When the engine is running,do not open the guard.
Stop the engine when changing the cutting blade.
Don´t put your hand into the machine.

SAFETY RULES

Read all this instructions and warnings before start.
This rules should be followed always to reduce the
risk of serious personal injury and/or arson. Become
familiar with the owner's manual before attempting to
operate this equipment. Keep this manual to consult
in the future.
WARNING!
WHILE BLADES ARE TURNING,
BE EXTREMELY CAREFUL.
- Do not allow hands or any other part of the body or
clothing inside the feeding chamber, discharge
chute, or near any moving part.
- Keep your face and body away from the hopper.
- Always stand clear of the discharge zone when
operating this machine.
- Be extremely careful that pieces of metal, rocks,
bottles, cans or other foreign objects are not
included.
- Do not allow children to operate this equipment.
- Do not operate the machine under the infl uence of
alcohol, drugs or medicines.
- Do not mount or remove parts of the machine
while in operation.
- Keep kids, pets or unauthorised staff 10 m away at
least.
- Do not run engine powered machines in an
enclosed area since the exhaust from an engine
contains carbon monoxide, which is colourless,
odourless and tasteless; Carbon monoxide can be
extremely dangerous in enclosed areas.
- Avoid wearing clothing that is loose fi tting or that
has hanging cords or ties.
- Do not operate the machine on a paved or gravel
surface where ejected material could cause injury.
- Wear ear protection and safety glasses at all times
while operating the machine.
- Before starting the machine, check that all screws,
nuts, bolts, and other fasteners are properly
secured and that guards and screens are in place.
Replace damaged or unreadable labels.