3.2 INSTALLATION METHOD
•
Fix the bracket to the wall using a box 503 and the screws provided or a Ø 60 mm box with suitable
screws.
•
Program the dip-switches and connect the system wires to the terminal boards.
•
Couple the video door phone to the bracket at the four hooks on the sides.
•
Remove the protective film from the display.
1
n. 2 M3,5 x 19 mm
provided
2
2
Remove the protective film from the video door phone display.
3.3 REPLACING THE VIDEO DOOR PHONE
Proceed as follows to replace a device:
•
Release the video door phone from the fixing bracket, by levering on the tongue on the lower part by
means of the screwdriver.
•
Remove the video door phone.
•
Couple the new device to the bracket by means of the hooks on the ends.
18
Box
503
n. 2 2,9 x 13 mm
countersunk screws
3
1
Box
Ø 60 mm
DS1723-049A