Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
PERFORMANCE
The features of the IP video door phone on are the following:
•
Designed on 2-module Sinthesi Steel style.
•
Management of pedestrian door electric lock with pulse capacitive discharge and with low holding
current (SE+; SE-).
•
Management of driveway electric lock with relay SE2 with clean contacts (C-NC-NO).
•
Hall button input.
•
Door sensor input.
•
Audio repeat device control for use with hearing aid.
•
LAN connection with RJ45 connector and POE power.
•
Power supply of 30 external name holder tags max. with POE.
•
Management of 32 calling buttons, of which two on-board and 30 external with the use of expansion
modules Ref. 1158/82 and 1158/84.
•
2 terminal pins for external power supply of name holder tags, if necessary.
•
CCD colour camera with wide-angle lens.
•
2 pre-cabled call buttons.
•
Input for external camera, alternative to the local one.
•
Management of audio repeater device for hard of hearing people and module with voice messages and
leds.
PANEL INSTALLATION
1.
Install the module at the height shown.
2.
Fit the module holder frame in the fl ush-mounting box.
3.
Fit the modules in the frame.
4.
Tip the frame and connect wires.
5.
Close the frame.
6.
Fit the name tags on the removable front.
7.
Fit the panel on the frame.
1
6
Ref.1158/42
Ref.1158/43
Ref.1158/44
2
Ref.1145/52
Ref.1145/53
Ref.1145/54
DS1039-043A
Publicité
Table des Matières
