Full Range" Mode; Description - L-Acoustics 115XTHiQ Manuel D'utilisation

7.2

"FULL RANGE" mode

7.2.1

Description

In ''FULL RANGE'' mode the 115XT HiQ enclosures are used in standalone configurations within their nominal
bandwidth (50 Hz - 20 kHz), for applications not requiring low frequency extension.
7.2.2 Connecting the 115XT HiQ to the LA4 / LA4X and LA8
Connect one 115XT HiQ enclosure to the output channel OUT1 / OUT2 and OUT3 / OUT4 of the LA4 / LA4X and
LA8 controllers.
With an LA8, an additional 115XT HiQ enclosure can be connected in parallel with each first one.
One LA4 / LA4X amplified controller can therefore drive up to two 115XT HiQ enclosures (see Figure 7Erreur !
Source du renvoi introuvable.).
One LA8 amplified controller can therefore drive up to four 115XT HiQ enclosures (see Figure 8Erreur ! Source du
renvoi introuvable.).
Note: This drawing is only a cabling scheme and does not represent a valid configuration.
Figure 5: Four 115XT HiQ enclosures connected to an LA8 controller
Note: This drawing is only a cabling scheme and does not represent a valid configuration.
Figure 6: Two 115XT HiQ enclosures connected to an LA4 / LA4X controller
HiQ_UM_ML_1-4
IN A
IN B
OUT 1 / OUT 2 OUT 3 / OUT 4
OUT 1 / OUT 2 OUT 3 / OUT 4
w w w . l - a c o u s t i c s . c o m
EN
13 en 13
13 13