Automatic Switching On" Mode; Temperature Unit Of Measurement Setting - Olimpia splendid CALDORAD DIGITAL Instructions Pour L'installation, L'emploi Et L'entretien

• It is advised to select the desired temperature before setting the function.
- Press the key "MODE" and wait until the symbols "AUTO OFF" and "
flash on the display.
- Press the keys "+" or "-" to select the desired delay time.
- When the symbol "
• The appliance will switch off after reaching the set switching off time.
• To disable this function, press the key "MODE" and wait until the display shows
the symbol "

4.3 - "AUTOMATIC SWITCHING ON" MODE

• This function is set to switch on the appliance automatically after a desired period
of time (1-24 hours).
• It is advised to select the desired temperature before setting the function.
- Press the key "MODE" and wait until the symbols "AUTO ON" and "
lash on the display.
- Press the keys "+" or "-" to select the desired delay time.
- When the symbol "
• The appliance will switch on after reaching the set switching on time.
• To disable this function, press the key "MODE" and wait until the display shows
the symbol "
When continuous operation "
switching on/off" and "Temperature setting" are disabled.

4.4 - TEMPERATURE UNIT OF MEASUREMENT SETTING

• Press the button "F/C" to select the unit of measurement of temperature:
- Celsius (°C)
- Fahrenheit (F)
EN- 14
" stops flashing, the value is set.
":
" stops lashing, the value is set.
":
" is on, the modes "Automatic
"
"