Temperature Setting; Automatic Switching Off" Mode - Olimpia splendid CALDORAD DIGITAL Instructions Pour L'installation, L'emploi Et L'entretien

3 - USE
Press the power key "
"continuous operation" and the symbol "
• If the key "
).
• If the key "
• If the key "
To switch off the appliance completely, press the ON/OFF switch (12).
4 - OPERATION
• After pressing the key "
appliance, a few functions can be selected:

4.1 - TEMPERATURE SETTING

• Press the key "MODE" and wait until when the
temperature symbol flashes on the display.
- Press the keys "+" or "-" to select the
desired temperature.
- When the temperature symbol stops
flashing, the value is set.
The display shows ambient temperature.
• At this point the appliance will reactivate automatically whenever the temperature
of the room will lower under the set threshold (the temperature symbol stops
flashing) and will switch on again once ambient temperature reaches the set
value (the temperature symbol starts to flash).

4.2 - "AUTOMATIC SWITCHING OFF" MODE

• This function is set to switch off the appliance automatically after a desired period
of time (1-24 hours).
", located on the control panel (6), to activate the
" is pressed once, the appliance activates at maximum power (
" is pressed twice, the appliance activates at minimum power ( ).
" is pressed a third time, the appliance switches off.
" to switch on the
" will appear on the display:
CALDORAD DIGITAL EN- 13