Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Place the appliance on a flat and stable surface, making sure it
cannot be damaged or fall. Protect the support surface.
•
Insert the brackets (8) in the supports (11) as shown in figure "5".
•
Position the supports (11) between the most external radiant wings (2) of the
appliance (1) (fig. 6).
•
Rotate the brackets (8) upwards (fig. 7).
•
Lock the supports (11) by screwing the wing nuts (9) (fig. 8).
Do not tighten the wing nuts (9) excessively.
•
Rotate the appliance to a vertical position (fig. 9).
• Do not use the appliance without having mounted the
supports and the wheels first.
• Only use the appliance in vertical position (handle "3"
above); every other position may create a dangerous
situation.
•
Entirely straighten the power cord.
• Place the appliance in an appropriate environment and on a stable and flat
surface.
• Make sure that curtains or other objects do not obstruct the air flow (fig. 3).
•
Leave at least 1 m of free space on the sides, behind the appliance and above
it (fig. 1).
Make sure there is not any flammable or sensitive-to-heat
object within 1 meter from the appliance.
•
Connect the plug to the power socket.
• Press the ON/OFF switch (12) (fig. 2).
• Make sure the mains data correspond to what is described
on the data plate of the appliance.
• Arrange cord away from traffic areas so that it will not be
tripped over.
EN- 12
Publicité
Chapitres
Table des Matières
