Updating A Remote Control Point - golmar C4+ Mode D'emploi

C4+ / DIRECTOR+ 1.0
The button 'Look' gives access to the directory where the image files are saved.
To associate a personalised sound message, press on the
microphone icon.
Record the desired message through the message recorder. This
message will be reproduced every time an event occurs relating to
the key or transmitter.
The section 'More information' in the handling file enables the
handling of 1 to 10 fields which can be personalised (level 2 required).
A personalised field is activated when its name is
the line desired from the list of fields, change its name in the text area and press 'Change'. The personalised
field can be documented and used during the search of a key or transmitter, or from t
tool.
Example:
Replacing 'Field 1' by 'Section' allows a key or transmitter to be associated with a parking place
3.5 UPDATING A REMOTE CONTROL
This option is accessed through the icon 'Update'
(only working with remot e control via modem).
In the table of exploitation of remote control, the
application of changes of configuration is effected in
deferred time.
The process of updating the remote control point
establishes the connection by modem, updates the
configuratio n of the centrals and captures the recorded
events.
The option of capture of events must be defined before
the connection is established. The option of automatic
disconnection can be deactivated for possible
variations at the last minute.
changed. To change the name of a personalised field select
24
he search and analysis