Time Bands; Series Of Keys Or Transmitters - golmar C4+ Mode D'emploi

C4+ / DIRECTOR+ 1.0

3.1.2 TIME BANDS

In the 'Access' menu mark the time
band to create it or change it.
A time band can be used as an
access band for a key or transmitter,
or as a free access band for a reader.
Used for a key or transmitter, it
authorises use during the bands
indicated.
Used for a reader, it activates the
opening of the door and invalidates
the reader during the time bands
indicated.
A time band can be detailed for all 7
days of the week and for public
holidays, with a limit of 4 time bands
per day.
The configuration can be simplified by using the modes 'Week/Weekend' or 'Daily'.
To add a segment, simply press on the free area of the day des ired. Each segment can be moved by sliding it,
reducing or extending it by the movement of the mouse, in steps of 5 minutes. To make more precise
adjustments, press on the segment that you wish to adjust and adjust the ends of it from the process areas.
Up to 8 different hour bands can be created.

3.1.3 SERIES OF KEYS OR TRANSMITTERS

On the 'Access' menu, mark series to
create.
The creation of a series of keys or
transmitters enables a single operation
to be used to define a large number of
authorised keys or transmitters for the
same readers and during the same
access bands.
The maximum number of keys or
transmitters (among all the series) is
6000.
To activate the functioning of a series of
keys, it is necessary to establish the
state of "In servi ce" and to have
assigned a "Group", in the case of
wanting to work with limited access an
access band will have to be assigned.
19