Centralised Mode With Programme Director - golmar C4+ Mode D'emploi

C4+ / DIRECTOR+ 1.0
1.5.2 CENTRALISED MODE WITH PROGRAMM E DIRECTOR+
This work mode allows for the connection of multiple centrals in parallel, to do this each central has to be
codified in the position that it occupies in the network, for correct handling of the installation with the programme
DIRECTOR+.
DIP -SWITCH: Binary coding of the number of the central in the network.
Range : 1
Value : 1
Example : to install central number 7, 1+2+4 = 7 , switches 1, 2 and 3 must be put to ON
In the case of working with remote control, the C4+ modem is connected between the RS485 interface and the
central. Also the telephone line.
No adjustment needs to be made to the C4+ modem, it comes pre -adjusted as standard.
Another modem must be ava ilable, in this case any on the market, to make the connection between the
computer and the telephone line.
2 3 4
2 4 8
DOOR 1 DOOR 3
DOOR 1 DOOR 3
DOOR 2 DOOR 4
DOOR 2 DOOR 4
5 6 7 and 8 fixed in ON
16 32
DOOR 1
DOOR 2
12
DOOR 1
DOOR 3
DOOR 4 DOOR 2
DOOR 3
DOOR 4