Troubleshooting - Shop-Vac ESL Serie Manuel D'utilisation

BEFORE DOING ANY WORK ON YOUR VACUUM, TURN THE UNIT OFF AND DISCONNECT THE PLUG
FROM THE WALL OUTLET.
PROBLEM
Suction weakens or
cleaner runs hot
Misitng in the
exhaust air
WARNING!
IF ANY OF THE MOTOR HOUSING PARTS SHOULD BECOME DETACHED OR BROKEN, EXPOSING THE MOTOR
OR ANY OTHER ELECTRICAL COMPONENTS, OPERATION SHOULD BE DISCONTINUED IMMEDIATELY TO
AVOID PERSONAL INJURY OR FURTHER DAMAGE TO THE VACUUM. REPAIRS SHOULD BE MADE BEFORE
REUSING THE VACUUM.

TROUBLESHOOTING

CAUSE
Clogged filter
Air leak
Obstruction in hose
or nozzle
Saturated filter
SOLUTION
Brush dirt from filter. If condition continues, change
filter.
Check all fittings for tight fit (nozzles, hose, etc.)
Check that tank cover is sealed properly.
Check nozzle, hose, etc. for obstructions, and
remove if present.
Replace saturated filter with a dry filter.
PAGE 11