Patek Philippe 5951 Mode D'emploi page 8

date CorreCtion
To set the date, actuate the correction push piece at 12
o'clock as many times as needed to display the current
date. The day of the week will advance simultaneously
with the date, but it can also be corrected separately if
it does not correspond to the date. The moon phase
can also be corrected separately.
CorreCtion of leap-year CyCle and montH
To simultaneously set these two displays, press the
correction push piece between 12 and 1 o'clock
as often as needed to display the desired year
numeral (4 = leap year, 1 = 1st year after a leap year,
2 = 2nd year after a leap year, 3 = 3rd year after a
leap year) and the correct month are displayed.
For guidance on the leap-year cycle, consult the
brochure entitled "Leap year and full moon calendar".
day of week CorreCtion
To correct the day of the week, actuate the push
piece between 8 and 9 o'clock as often as needed
to display the correct day.
moon-pHase CorreCtion
The moon-phase display changes in the early
afternoon. Its mechanism is active between 12
noon and 2 pm. Each time the push piece between
10 and 11 o'clock is pressed, the moon-phase disk
will advance by one day. To begin the correction
procedure, advance the moon-phase disk until
a full moon is displayed in the middle of the
aperture. Consult a moon-phase calendar (see
brochure "Leap year and full moon calendar")
or the website www.patek.com (click on "Patek
Philippe", "Movements",
Settings", "The Lunar Phase Indicator") to find out
how many days have elapsed since the last full
moon (including the day on which you correct the
display). To correctly set the moon-phase display,
press the push piece as many times as the number
of days that have elapsed since the last full moon.
"Complications/