Sony SU-WL850 Informations D'installation page 14

Installing the TV to the Wall from
Table-Top Stand
1
Remove the screws from the
rear of the TV.
2
Attach the
WM2
.
M6
WM2
to the TV using
M6
− 14 (GB) −
3
Detach the Table-Top Stand
from the TV.
 Remove one side of the Table-Top Stand
at a time. Firmly hold the Table-Top
Stand securely with both hands while
the other people lift up the TV.
 Repeat the previous step and remove
the other side of the Table-Top Stand.
Note
 Three or more people are required to detach the
Table-Top Stand.
 Be careful not to use excessive force while
detaching the Table-Top Stand from the TV as it
may cause the TV set to fall resulting in personal
injury or physical damage to the TV.
 Take care when handling the Table-Top Stand to
prevent damage to the TV.
 Be careful when lifting the TV as the Table-Top
Stand is detached, the Table-Top Stand may
topple over and cause personal injury.
 Take care when removing the Table-Top Stand
from the TV to prevent it from falling over and
damaging the surface that the TV is sitting on.