135-Hour Maintenance; Carburettor Adjustment - Shindaiwa T243XS Manuel D'utilisation

Maintenance
1. New grease
2. Old grease
1. Fuel filter

135-Hour Maintenance

Carburettor adjustment

YOU MAY ADJUST THE IDLE SPEED ONLY by turning the idle speed adjustment screw(T).
During carburettor adjustment, the cutting attachment may move. Pay utmost attention and care to the cutting at-
tachment so as not to get injured by the moving cutter.
When carburettor adjustment is completed, the cutting attachment should not move at idle speed, otherwise serious
personal injury may result.
You must NOT carry out any Carburettor adjustment, other than the idle speed. All other adjustments MUST be per-
formed by an authorized service dealer, or serious personal injury may result due to malfunction of the engine.
When there is trouble with the carburettor, contact an authorized service dealer.
3. Output shaft collar
2. Hooked wire
WARNING
CAUTION
Clean the cylinder cover and clean grass and dirt from the cyl-
inder fins.
Remove the cutting attachment, cutting attachment holder and
gear shaft collar. Remove the filler plug from the side of the
gearcase and press new grease into the gearcase until old
grease is pushed out. Use good quality lithium multi grease.
Lubricate main shaft splines.
Fuel Filter Maintenance
Use a hooked wire to extract the fuel filter from inside the fuel
tank. Remove and replace the filter element. Before reinstalling
the filter, inspect the condition of the fuel line. If damage or dete-
rioration are noted, the unit should be removed from service until
you can consult with an authorized servicing dealer.
Make sure you do not pierce the fuel line with the end of
the hooked wire. The line is delicate and can be damaged
easily.
Never operate the unit with a damaged or missing silencer
or spark arrester! Operating with a missing or damaged
spark arrester is a fire hazard and could also damage your
hearing.
Carbon deposits in silencer will cause a drop in engine output
and overheating. Spark arrestor screen must be checked pe-
riodically. Clean deposits from silencer.
IMPORTANT
Do not remove the silencer cover. If necessary, Please consult
your dealer.
28
CAUTION
WARNING