Publicité
Les langues disponibles
Les langues disponibles
-Make sure that the glass assembly has no stress due to the risk of breaking from causes as:
- Mechanical hazards from the outside
- Excess temperature in the equipment itself
-The temperature must be always set, at least, 25°C below the ignition temperature of the materials
used
-Check equipment and accessories before each use and do not use components in poor condition
-Safe operation of the equipment is only guaranteed with the accessories described in chapter "Packing
list". The accessories must be firmly attached to the equipment and cannot come loose
-Always turn off the power before installing accessories
-Do not cover the ventilation outlets of the unit to ensure adequate cooling of the rotary evaporator
- Adapt the quantity and type of solvent to the size of the distillation equipment
- Please know that high concentrations of gases, steam or particular matters can escape through the
cooler. Avoid this risk by using, for example, cold water traps, gas wash bottles or an effective extraction
system, such as showcases
- The glassware is designed for operations with maximum vacuum of 10 mbar. The glass must be cooled
down before its removal and reuse
- Avoid formation of peroxide. Organic peroxides can accumulate in the distillation and generate
exhaust residues that explode easily when decomposed
- Never heat the evaporation flask in the bath without first actuating the rotary motion. In this way, you
will avoid possible losses of your sample
- Pay attention to the temperature setting; never leave the equipment unattended during operation and
with the heating function on
- Do not handle the rotary evaporator when the rotating piston is working. It is recommended to
gradually increase and/or decrease the rotation speed if situations such as an irregular operation occur
- The equipment can only be disconnected from the power outlet by pulling the plug base, not the cord
- The voltage indicated on the equipment must correspond to the electrical network used
- Make sure that the main power cord is not in contact with the heating surface. Do not cover the
equipment
- Keep the equipment away from high magnetic fields
2. Rules
This equipment is specially designed for distillations for educational, laboratory or industrial purposes.
This apparatus is not suitable for use at home or in environments that could be hazardous to the user or the
equipment.
4
Publicité
