Publicité
Les langues disponibles
Les langues disponibles
5.1.7 Support rod
The support rod contains a tape that holds the glass assembly. This accessory is optional and has the sole
purpose of providing additional stability to the equipment. Especially, we recommend it for glass assemblies
that contain a condenser.
-To install the support rod (J), it is necessary to use the locking key (A) removed in chapter
Working position and electrical connections"
-Position the support rod between the refrigerator and the main body; use the lock key (A) and the
screw at the bottom of the motor where there is a slot for that purpose. Once the position is fixed, use the
tape provided with all the equipment to surround the condenser and join it with the locking device
Figure 14
5.1.8 Connections of the tubes
The following image shows a diagram of the connection of the equipment tubes:
(Figure 7)
Figure 16
12
Figure 15
Water inlet
Water outlet
"5.1.2
Publicité
