EUROM Safe-t-Convect Manuel D'utilisation page 26

Timer setting
1. Press the Timer button on the control panel or the remote control to activate the timer.
The timer indication will appear on the display.
2. Use the plus and minus button to set the countdown timer between 1 hour and 24
hours. The timer symbol will appear on the display.
3. The display shows the time in descending order when the device will switch off
automatically.
ECO mode
The remote control has an ECO button for an energy-efficient mode; the device maintains the
room temperature at 16 °C.
1. Press the ECO button to activate.
2. Press the ECO button to deactivate.
With the Max button on the remote control the capacity at which the ECO mode will work
can be chosen: low, medium or high capacity. Please note that the heating capacity in ECO
mode is different than heating capacity in normal mode. Both heating capacities need to be
set separately.
Frost mode
The remote control has a Frost button for a frost protection mode; the device maintains the
room temperature between 5 °C and 8 °C.
1. Press the Frost button to activate.
2. Press the Frost button to deactivate.
With the Max button on the remote control the capacity at which the Frost mode will work
can be chosen: low, medium or high capacity. Please note that the heating capacity in Frost
mode is different than heating capacity in normal mode. Both heating capacities need to be
set separately.
Remote control slot
1. The remote control (Figure 13, pos. 2) can be
placed in the remote control slot (Figure 13,
pos. 1) on the side of the device.
26
Figure 13