Télécharger Imprimer la page

Unpacking; Safely Disposing Of Packaging Material; Preparatory Work Before Installation - Stahl EC-940S Serie Manuel D'instructions

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 85

7.2 Unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
7.3 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Ex-proof housing
• Spacers and screws for mounting the sunshield
• Cable tie
• Silicon sheath
• Instructions manual
• Spare O-rings
• Sunshield
• Bolts and screws
7.4 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
When returning a faulty product we recommend
using the original packaging for shipping.
MNTCMVXTHD_1606_EN
7.5 Preparatory work before
installation
Use appropriate tools for the installation.
The particular nature of the site where the
device is to be installed may mean special
tools are required for installation.
The installer must ensure the earth
continuity between the product and the
system.
Choose an installation surface that is
strong enough to sustain the weight of
the device, also bearing in mind particular
environmental aspects, such as exposure to
strong winds.
Make sure the appliance is securely
anchored before supplying power.
CAUTION! Device installation and
maintaining must be performed by
specialist technical staff only.
For technical services, consult only and
exclusively authorized technicians.
Since the user is responsible for choosing
the surface to which the unit is to be
anchored, we do not supply the fixing
devices for attaching the unit firmly to
the particular surface. The installer is
responsible for choosing fixing devices
suitable for the specific purpose on hand. In
general use methods and materials capable
of supporting at least four times the weight
of the device.
It is possible to install the unit with several brackets.
We strongly recommend using only approved
brackets and accessories during installation.
19

Publicité

loading

Ce manuel est également adapté pour:

Ec-840s serieEc-940s hd serie