Motorola Solutions Mag One BPR 40d Guide De L'utilisateur page 29

Chapter 11
Initiating Radio Disable
Prerequisites:In One Touch Access, set the <required call type> to Radio DISABLE.
Procedure:
1 Select the channel with the subscriber ID that you want to disable transmission from.
2 Press the programmed One Touch Access button.
When your radio transmits disable signal, your radio shows the following indications:
• A tone sounds.
• The red LED illuminates.
If initiating radio disable is successful, your radio shows the following indications:
• A positive indicator tone sounds.
• The green LED blinks once.
If initiating radio disable is unsuccessful, a negative indicator tone sounds.
The receiving radio shows the following indications:
• A tone sounds.
• The red LED blinks once.
MN007942A01-AB
Initiating Radio Disable
29