Breville the Oracle Manuel D'instructions page 23

NOTE
The machine will exit Advanced Features if
there is no user input for 30 seconds or the
POWER button or MENU button is pressed.
Reset Default Settings (rSEt)
Use this function to reset all programmable
values back to the default settings. The
machine has the following default settings:
1. Shot Temperature: 200˚F (93˚C)
2. Low Pressure Pre-infusion:
PP60, PT07 seconds
3. Milk Temperature: 150˚F (65˚C)
4. Auto Start: OFF (8:00AM)
5. Auto Off: 1 Hour
6. Clock: 12:00AM
7. 1 CUP Button Shot Duration:
25 seconds
8. 2 CUP Button Shot Duration:
30 seconds
While 'rSEt' is displayed on the LCD, press
the SELECT dial to reset all settings to
factory defaults.
'Hrd3' will flash on screen. Machine is
now in Water Hardness mode. See 'Water
Hardness (Hrd3)' to set.
+
POWER
Descale (dESc)
Select this feature to access the step by step
descale procedure on the LCD. Refer to
page 34 for the accompanying instructions.
Water Hardness (Hrd3)
Determine water hardness with the supplied
water hardness test strip. Refer to 'Setting
Water Hardness', page 13.
Rotate SELECT dial to the required setting
from 'Hrd1' (softest water) to 'Hrd5' (hardest
water). Press SEL
NOTE
The machine will exit Advanced Features if
there is no user input for 30 seconds or the
POWER button or MENU button is pressed.
ECT dial to set. Machine will beep once to
confirm selection.
Setting water hardness will determine the
regularity of the 'CHANGE FILTER' alert
which indicates when the water filter in the
water tank needs to be replaced.
Units (SEt)
Set units to metric or imperial. Rotate
SELECT dial to the desired unit. Press
SELECT dial to set. Machine will beep once to
confirm selection.
LCD Backlight (Lcd)
Adjust the LCD brightness/contrast. Rotate
SELECT dial to the desired brightness. Press
SELECT dial to set. Machine will beep once to
confirm selection.
Spotlights (SPOt)
Adjust the brightness of the LEDS lighting
the drip tray area. Rotate SELECT dial to the
desired brightness. Press SELECT dial to set.
Machine will beep once to confirm selection.
23