Functions Of The Keys - Metrix MX 407 Notice De Fonctionnement

Masquer les pouces Voir aussi pour MX 407:

Table des Matières

Les langues disponibles

The measured resistance value is displayed on the screen.

3.2

Functions of the keys

The functions of the

accessed by successive short or long presses. Each press is

confirmed by an audible signal.

3.2.1

key

This key is used to hold the display of the measured value, for all

positions of the switch. The HOLD symbol is displayed on the

screen.

For insulation measurements, the HOLD is activated automatically

after each measurement.

Special case when the device is started up: a long press at start-up

de-activates the automatic switching off of the device.

Each press of

this length...

Any

short

position

3.2.2

key

This key is used to hold the insulation measurement in permanent

mode (measurement campaigns, for example).

The

symbol is displayed on the screen.

keys can be

and

...serves

to hold the display of the

measured value;

to exit from the HOLD mode .

Table des Matières

Table des Matières